Larken StarCAM

Discussion of post processors for various CNC machines

Larken StarCAM

Postby darren » Tue Jan 06, 2015 11:50 pm


A friend of mine has a Larken CNC ( and they run their own processor called StarCAM. Any chance of getting a MeshCAM post-processor for their controller, or will basic generic GCode do the job?

They seem to have their processor's capabilities documented here:
Posts: 9
Joined: Sat Mar 08, 2014 12:39 am

Re: Larken StarCAM

Postby Randy » Wed Jan 07, 2015 2:16 am

I found a gcode list on page 31 of the Starcam3.pdf user manual from the downloads page.

Gcodes are the standard G00, G01, G02, G03 and G04 for motion and M03, M05 and S for spindle on/off and speed control, and M06 pauses for a toolchange.

It looks like the "basic gcode inch-arcs" post should work OK. You will need to set the controller to use the Gcode spooler.

All opinions in this post are mine alone. I am not a MeshCAM employee, I do not have a financial interest in MeshCAM, nor do I speak for MeshCAM. MeshCAM user since Beta 5 in 2003. viewtopic.php?f=11&t=15333 :ugeek:
Posts: 1812
Joined: Wed May 14, 2008 9:50 am
Location: North Texas, USA

Return to Post Processors