Meshcam with Laguna IQ

Discussion of post processors for various CNC machines

Meshcam with Laguna IQ

Postby Dmac252 » Thu Sep 07, 2017 5:45 pm

I recently bought a Laguna IQ HHC. And I was
wondering if there is a post processor setting for it. I was originally
Using meshcam with an X-carve I had
Dmac252
 
Posts: 15
Joined: Tue Feb 23, 2016 3:11 am

Re: Meshcam with Laguna IQ

Postby larynx » Tue Oct 10, 2017 1:17 pm

If you still require help with post processors, I suggest you see that it goes to support staff - per the post on the main page:

"If you find problems with the built-in post processors then email us, we’d be happy to see if you can make modification for you for free."

support@grzsoftware.com

I use a homebuilt machine, so I am not familiar with your Laguna and my tweaks may not apply nor help you. If you take it to tech support, then most likely it would also be included in the standard updates for everyone else that has a Laguna, or purchases MeshCAM down the road.

That is the only suggestion I have for you at this time as no one appears to be answering.
I am not aligned with nor do I have any relationship with MeshCAM or its staff other than being a user [that sounds a little like I have a dependency problem]
larynx
 
Posts: 69
Joined: Thu Oct 29, 2015 2:56 am
Location: East Central Florida


Return to Post Processors