Happy Veteran's Day!

Gallery of projects completed with MeshCAM

Happy Veteran's Day!

Postby AdPrinter » Fri Nov 11, 2011 8:07 pm

I just finished all these just in time for Veteran's Day. MeshCAM Art rocks!
NavyPic.png
US Navy
NavyPic.png (535.88 KiB) Viewed 5141 times
AirForcePic.png
US Air Force
AirForcePic.png (345.83 KiB) Viewed 5141 times
ArmyPic.png
US Army
ArmyPic.png (368.11 KiB) Viewed 5141 times
CoastGuardPic.png
US Coast Guard
CoastGuardPic.png (419.92 KiB) Viewed 5141 times
MarinesPic.png
US Marine Corps
MarinesPic.png (399.58 KiB) Viewed 5141 times
AdPrinter
 
Posts: 56
Joined: Sun Oct 04, 2009 6:18 am

Re: Happy Veteran's Day!

Postby AdPrinter » Fri Nov 11, 2011 8:19 pm

Forgot to mention the details, MeshCAM Art was used to create the toolpaths. However, since I do not have proper tooling to work with, many of the fine details were hand finished using a Dremel tool. But the basic shapes were accomplished completely by MC Art.
These pieces are carved in laminated Oak (recycled tractor-trailer floor). The material is 1.125" thick before machining, and average 0.75" thick afterwards. (EXCEPT the Marine Corp, which ended up being about 0.375" thick because of the extended height of the globe). Sizes vary by the piece, from 8.5"x11" to 11"x11".
All artwork was created in Corel Draw, and perimeter cuts were simple rectangles created in CAD and imported into Artsoft's LazyCAM.
Enjoy!
-Michael
AdPrinter
 
Posts: 56
Joined: Sun Oct 04, 2009 6:18 am


Return to Gallery

cron